CELLULAR |
|
ELECTRICAL |
||
AK11-LX (AT&T) |
LTE FDD Cat.1 |
|
Operating Voltage |
Vehicle 12V / 24V system |
B2 (1900), B4 (AWS1700), |
|
Current Consumption |
Operating: 45-180mA @ 12V |
|
B5 (850), B12 (700) |
|
Deep Sleep: 1.4mA @ 12V |
||
WCDMA B2 (1900), B5 (850) |
|
Backup Battery (Optional) |
3.7V 920mAh |
|
AK11-LX (Verizon) |
LTE FDD Cat.1 |
|
|
|
|
B2 (1900), B4 (AWS1700), B13 (700) |
|
MEMORY |
|
AK11-LS (Sprint) |
LTE FDD Cat.1 |
|
Internal Flash Memory |
64 Megabit |
|
B2 / B25 (1900), B4 (AWS1700) |
|
Up to 120,000 logs |
|
|
B5 / B26 (850), B12 (700) |
|
Up to 21,000 queues |
|
AK11-LU (Telstra) |
LTE FDD Cat.1 |
|
|
|
B1 (2100), B3 (1800), B5 (850), B8 (900), |
|
SENSORS |
|
|
|
B28 (700) |
|
Accelerometer |
3-axis ±16g |
WCDMA B1 (2100), B5 (850), B8 (900) |
|
|
||
Data Support |
UDP / IP, TCP / IP, SMS over IMS |
|
ENVIRONMENTAL |
|
Antenna |
Embedded cellular antenna |
|
Operating Temperature |
−40 to +70 °C (without battery) |
|
−20 to +60 °C (with battery) |
|||
GPS |
|
|
Humidity |
95%RH @ 50° C non-condensing |
Receiver Type |
72 channel engine |
|
Vibration/Shock |
MIL-STD-810G |
Location Technology |
GPS & GLONASS |
|
|
|
SBAS Support |
WAAS, EGNOS, GAGAN, MSAS |
|
PHYSICAL |
|
Tracking Sensitivity |
-167dBm |
|
Dimension |
152mm × 98mm × 30mm |
Acquisition Sensitivity |
-148dBm |
|
|
(5.98" x 3.86" x 1.18") |
Location Accuracy |
2.5m CEP 50% |
|
Weight |
229g (0.50 lb) |
Antenna |
Internal (Optional external antenna) |
|
Enclosure |
Flame Retardant ABS+PC |
|
|
|
Mounting Method |
Screw Mounting Bracket, Adhesive |
INPUTS/OUTPUTS |
|
|
|
|
Vehicle BUS Protocols |
ISO 15765-4 (CAN) |
|
CONNECTORS |
|
|
ISO 14230-4 (KWP2000) |
|
I/O Connection |
Molex 14 Pin Connector |
|
ISO 9141-2 |
|
SIM Card Socket |
Mini SIM(2FF) |
|
SAE J1850 VPW / PWM |
|
PC/Accessory Interface |
4 Pin RS232 with 5V (±5%) Power |
|
SAE J1939 / J1587 / J1708 |
|
External GPS |
SMA |
Digital Ignition Input |
1 Positive Input |
|
Configuration Interface |
Mini USB Port |
Digital Inputs |
Up to 8 (Configurable) |
|
Vehicle BUS Interface |
Molex 12 Pin Connector |
Digital Outputs |
Up to 5 (Configurable) |
|
Optional Wire Harness for OBD-II, |
|
|
Max. sink current 300mA |
|
DEUTSCH 6Pin/9Pin Connector |
|
Analog Inputs |
Up to 3 (Configurable) |
|
|
|
|
DC 0~5V, DC 0~40V (12bits resolution) |
|
DEVICE MANAGEMENT |
|
1-Wire® Interface |
1 (Driver ID, Temperature sensors) |
|
Configuration |
ADM, SMS, USB Cable |
LED Indicators |
5 LEDs (Power, GPS, Cellular, Wi-Fi, BT) |
|
Firmware Update |
ADM, FOTA, USB Cable |
Buzzer |
>80dB @ 10cm |
|
|
|
Bluetooth (Optional) |
Bluetooth BLE 4.1 |
|
CERTIFICATIONS |
|
Wi-Fi (Optional) |
2.4GHz IEEE 802.11b/g/n AP Mode |
|
Standards |
FCC, IC, PTCRB, NCC, RoHS |
|
Data rate DL: 3Mbps UL: 1.5Mbps |
|
Carriers |
AT&T, Verizon, Sprint, U.S. Cellular |